VE6AB Antenna Werks
Antenna Werks - Parts To Go
Stock antenna parts being machined in my machine shop for my antenna project ....
"A Monobander for Going Mobile on 17 Meters"
The article on my 17 meter monobander is featured in the 2014 May issue of QST.
hams who may be building it, may short-cut the process by purchasing these machined parts from me.
Regardless of whether or not your building my antenna, and because these adapters were designed to work with PL-259 connectors, they may be exactly what you need for your own antenna project.
The part on the left is the whip adapter, and the part on the right is the mast adapter, and they were designed to take the place of the coax-adapter that screws in to a PL-259 connector.
The mast-adapter has a internal thread tapped 3/8" X 24 TPI for the various common masts available.
Contact me for prices and delivery.......
stormchaser@shaw.ca
2014 QST Cover........
http://www.jerryclement.ca/HamRadio/HamRadio#!/i-F6p7vtC
Here is the link to visit my shop.....
http://www.jerryclement.ca/MachineShop/Machine-Shop/
- No Comments