VE6AB Antenna Werks

Antenna Werks - RF Adapters

You cannot have to many RF adapters to go with your favorite antenna analyzer, as it seems like every time you think you have it covered, you need to aquire another one.

The RF adapters shown here with my antenna analyzer, I bought individually, as that seemed to work the best for me.

The RF output connector on my RigExpert AA-600 is a type N, and therefore what may look like duplicates in my selection of adapters are because some of them I have in my selection are both type N and UHF.

The PL-259 adapter that resides in this selection, is actually a 50 ohm dummy load, that I built for calibrating my analyzers.

This photo shows my CJU Satellite antenna mounted on my analyzer, and when I built this antenna, I had a target frequency of 436.795 Mhz in mind, the downlink frequency for the Saudi bird SO-50 amongst others.
As you can see by the display, the antenna is good to go. As seen in this photo, this antenna attaches directly to your favorite HT.

Click on the photo for a closer look.

2014hamradio.mobilegearmotorscrewdriverAPRSweatherstationantennaradioanalyzertransceiverhanditalkicomputerbondingbraidcoaxferritebeadsTNC